• News
  • Take Action
  • Videos
  • Social
  • About
  • Donate

Live Each Day
With Courage

facebookX
  • News
  • Take Action
  • Videos
  • Social
  • About
  • Contact
  • Newsletter Signup
  • Privacy Policy
  • Donate

The Wyoming Legislative Process

The Scout
November 3, 2025

The Wyoming Legislature operates as a citizen legislature: part-time lawmakers who meet for a limited number of days each year on a biennial cycle totaling just 60 legislative days every two years. This structure shapes everything from how bills are introduced to how the state budget is crafted. This guide explains the process step by step.

Wyoming’s Legislative Process: Structure, Sessions, and Budget Authority

Wyoming alternates between two types of sessions:

  • General Session (odd-numbered years, such as 2025):
    Runs for up to 40 days. It allows a wide range of bills to be introduced and debated. Only a simple majority vote is required to introduce a bill and to pass it.
  • Budget Session (even-numbered years, such as 2026):
    Lasts about 20 days. Its primary purpose is to pass the state’s two-year budget. Non-budget bills face a much higher threshold: they must receive a two-thirds (⅔) majority vote to be introduced and debated.

During odd-year General Sessions, lawmakers may also pass a supplemental budget to adjust the previous biennial budget. This can correct errors, account for inflation, or address unexpected needs. Supplemental budgets became routine starting in the 1970s and contributed to steady growth in state spending. Notably, in 2025 the Legislature chose not to pass a supplemental budget, the first such instance in the modern era. While some fiscally impactful bills still advanced, skipping the supplemental budget was viewed as a meaningful act of fiscal restraint for Wyoming taxpayers.

How Committees Are Formed and What They Do

Much of the real work of the Legislature happens in committees, both during the session and in the months between sessions.

During the Legislative Session:

House and Senate standing committees operate separately in their own chambers. Each committee focuses on a specific policy area (see the full list below). These committees review bills, hold public hearings, take testimony, debate amendments, and vote on whether to send a bill forward to the full chamber. 

Between Sessions (Interim Period)

After the session ends, most standing committees merge into joint interim committees.

  • House and Senate versions of the same committee combine into one bipartisan group.
  • Members come from both chambers and both parties.
  • Leadership in each chamber appoints the members (usually reflecting party majorities).

The Legislative Management Council — a bipartisan group made up of House and Senate leadership — plays a key role by:

  • Deciding which topics each joint interim committee will study
  • Monitoring committee work
  • Setting the calendar for the next budget session
  • Handling the Legislature’s administrative tasks during the interim

These joint interim committees travel across the state, study assigned issues, hold open public hearings, gather input, and develop bill ideas for the next session. Many bills introduced each session originate directly from the research and recommendations of these joint interim committees. When the next session begins, the joint interim committees split back into separate House and Senate standing committees and continue working independently. Note: The committees of the Wyoming Legislature keep the same names whether they are working jointly (during the interim) or separately (during the session).

  • Judiciary
  • Appropriations
  • Revenue
  • Education 
  • Agriculture, State and Public Lands & Water Resources
  • Travel, Recreation, Wildlife & Culture Resources
  • Corporations, Elections, and Political Subdivisions
  • Transportation, Highways and Military Affairs
  • Minerals, Business and Economic Development
  • Labor, Health, & Social Services
  • Journal (only a standing committee)
  • Rules and Procedures (only a standing committee)

How Bills Are Created

Bills reach the floor of either the House or Senate through two main routes.

  1. Joint Interim Committees: Many bills originate from the research, study, and recommendations of the joint interim committees described above.
  2. Individual Legislators: Individual legislators can also sponsor bills, often drawing from constituent concerns, agency requests, interest groups, court rulings, or campaign promises. Additional lawmakers may sign on as co-sponsors to build support.

Bill Drafting Process

All bills are drafted and reviewed by the Legislative Service Office (LSO), which checks legal soundness, suggests wording, and assigns a bill number: 

  • HB = House Bill
  • SF = Senate File

There is no strict interim deadline, but most sponsors aim to pre-file by early December. Once the session begins, a firm cutoff (roughly one-quarter of the way through the allotted days) prevents any further new bills from being introduced.

The Life of a Bill: Introduction, Committees, and Floor Action

Once drafted and numbered by the Legislative Service Office, a bill must follow a structured path through the Wyoming Legislature.

First, it is introduced by leadership. It must then pass an introduction vote by the full chamber. This is a significant early hurdle — especially during the short Budget Session, where a two-thirds (⅔) majority is required.

If the bill fails the introduction vote, it is dead. If it passes, it is assigned to a relevant standing committee.

After passing introduction, the bill is assigned to a standing committee for testimony, debate, and possible amendments. If the bill receives a majority vote from the committee members, it advances to the next step; if not the bill is dead.  

Bills that survive committee move to the General File, where the Majority Floor Leader sets the schedule for if and when it will be debated. The chamber then considers the bill through three readings:

  • First Reading (Committee of the Whole): The full chamber debates the bill and considers amendments. A voice vote is taken. If the bill is not heard before the Committee of the Whole deadline, it dies on the General File.
  • Second Reading: The bill is considered again the following day and may still be amended. Another voice vote is taken. If the bill is not heard before the second reading deadline, it dies.
  • Third Reading: This is the final vote in the chamber. A recorded roll call vote is required. If the bill passes, it moves to the other chamber. If it fails, it is dead for the session.

Reconsideration

If a bill fails at any stage, a member may move to suspend the rules and request reconsideration. A majority vote is required to proceed. 

  • If approved, the bill returns to the stage where it previously failed. 
  • If the motion fails, the bill remains dead.

Process in the Second Chamber

Once a bill passes one chamber, it goes to the other chamber (House or Senate), where the entire process repeats: committee review, General File, and three readings.

A key deadline in the second chamber requires bills to be reported out of committee by a specific date. If they are not, they die regardless of prior progress.

Amendments

Throughout the process, amendments may be introduced at both the committee level and during floor debate. These changes can significantly alter the bill’s meaning, scope, or impact, sometimes causing legislators to change their position on the bill.

Where Bills Commonly Stall in the Process

Understanding where legislation fails is just as important as understanding how it passes. At each stage of the process, there are specific points where bills are most likely to stall or die. The most common failure points include:

  • Failure of introduction (especially common in budget sessions)
  • Committee vote failure
  • Never being scheduled on the General File
  • Not being heard before the Committee of the Whole (COW) deadline
  • Missing the second chamber committee deadline
  • Running out of legislative days

After A Bill Has Passed Both Chambers

Once a bill passes both the House and the Senate, it becomes an enrolled act. The Governor may:

  • Sign it into law
  • Allow it to become law without a signature
  • Veto the entire bill OR (in the case of budget bills) issue a line-item veto. 

The Governor has 3 days (excluding Sundays) while the legislature is still in session and 15 days (excluding Sundays) after adjournment to sign or veto the bill. If the Governor vetoes the bill, the Legislature may attempt to override the veto by following this procedure:

  1. The Majority Floor Leader in the chamber where the bill originated must introduce a motion to override.
  2. That chamber debates the motion and needs a two-thirds (⅔) majority to proceed.
  3. If successful, the process repeats in the other chamber.
  4. A two-thirds (⅔) majority vote in both chambers is required to override the veto and enact the bill into law.

Special Session for Veto Overrides

If the Legislature has already adjourned when a veto occurs, it must convene a special session to consider an override. 

Under the Wyoming Constitution, this requires a petition signed by two-thirds of the members in both chambers (42 House members and 21 Senators). Any legislator—not just leadership—can initiate the petition.

X
facebookX

Copyright © 2026 HonorWyoming. Privacy Policy

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.